Brochure and attached documents:

Rimor products

RIMOR srl founded in 1987, is engaged in the industrial plants sector. It was born as Marelli distributor for the commercialization of electric motors, exhausters and elements for air treatment.

RIMOR srl, has improved thanks to a rich experience in a series of diversified activities.
In order to increase and integrate its productive capacity, in 2014 Rimor srl acquired Camit srl and now both companies constitute a business group with a combined annual revenue of 6.5 million euros; two headquarters with a combined surface of 4000 mq, with a total of 50 employees and that use the latest technology for the development of their products.

CAMIT srl has designed and realized industrial plants for surface treatments since 1997.
Both companies actively purpose a solid financial situation in order to successfully manage important orders and projects.

RIMOR srl produces industrial components, machineries, air treatment systems and aeraulic plants.

CAMIT srl produces sandblasting plants, painting plants and shot blasting plants.
The acquisition strengthened both companiesí productive, commercial and distribution capacity. Both companies are certified ISO 9001 and although they are independent, they operate in conjunction worldwide.

Products

Industrial Fans


Industrial Fans

Description

Industrial fans with particular features that make them competitive for applications with hot flows up to 1000įC and also for applications where a reduced noise level is required.

For this purpose there are the soundproof cabins, the silencers and the ROTOCABE.

Rotocabe


Rotocabe

Description

Rimor Rotocabe is an European patent of a soundproof fan.

Reference fields of application : basically all types of industries, in particular the steel industry, cement industry and brick industry, glass industry and power production.

Every type of material and dimensions are available.

Package Fans


Package Fans

Description

Fan systems that compound fans + valves + joints+ soundproof cabins + inverter drives.

They are applied in every area of process plants, in particular DENOX plants (denitration), biomass and energy production, heat treatment of waste.

RECUBE Plug Fan


RECUBE Plug Fan

Description

This is a patented air treatment system, that will give a valid alternative to the traditional UTA or CTA systems, and also to the PLUG fan (with direct fan) with particular attention to the performances (10 points higher than the traditional one) and to the easiness of usage, maintenance, application on site, with the possibility to integrate filters and heaters on board, with a wide range of accessories such as valves groups and heating groups.

Stirrer Fans


Stirrer Fans

Description

This fan series are used to increase the convention of the furnaces for the heat treatment of metals and itís based on a technology that started to be used from the year 2000, with electric motors with long shaft (without referral or joints) and dissipation systems with air, water or with compartimentations in controlled atmosphere (nitrogen).

Particularly appreciated by customers is the possibility of different geometries that guarantee, at reduced speed, great air flow and the presence of welded or melted series for working with temperatures above 1000įC.

Wide is the choice for solutions regarding the mounting on furnaces with insulated buffers.

Good products for their particular performances in terms of efficiency compared to traditional systems.

Valves


Valves

Description

Air valves of any dimension and type with particular attentions to the materials both for corrosive environments and for high temperatures (also in refractory above 1000įC) with special seal systems.

An extensive range of electric, pneumatic and mechanical motorization, wear-resistant coating, solutions with plates and levers easily replaceable, compartmentalization upstream-downstream with flushing air, perfect external seal and with fast securing systems, both electric and pneumatic.

Flexible joints


Flexible joints

Description

Rimor flexible joints for air are designed to face in an innovative way the vibrationsí problems: the body system includes an iron external structure and a removable flexible internal part in a multilayered texture, insulation and reinforcements with metallic mesh.

Particularly appreciated the long-life, the capacity and the range of pressure and air flow, over the big dimensions attainable.

Filters


Filters

Description

The Rimor filtersí master-piece is the Dust Remover with inclined cartridges that can receive any type of filter eligible to reduce the discharge according the standards.

It can be used for any metal or non metal manufacture of smoky type or dusty type.

The Dust Remover is a very advantageous filter because itís a one-block system with on board: fan, filter, pre-filter, soundproof cabin, inverter. It is equipped with 4 electronic control systems: capacity, pressure, step by step , stat&stop.

Soundproof


Soundproof

Description

The soundproof cabins are especially appreciated for their support structure that is designed to be easily built on site holding the soundproofing panels without damaging them with holes and allowing their easy substitution whether needed.

The range available includes the ďlargeĒ series with the cabinís dimensions to 10 metres of light, without internal columns.

Also the accessory range is wide, available for the access and it is possible the integration with the internal gantry for the movements.

The cabinís appearance is designed to satisfy the needs of environmental harmony.

Trims suction and grinding


Trims suction and grinding

Description

Rimor has two aspiration systems for trims: by venturi or direct. There are 3 treatment lines: fragmentation, grinding and in line recovery on extruder.

The Venturi system is on recovery with bypass and it is a part of the Recube venturi series, that is a one-block machine, silenced up to 22kw, that is an alternative to the classic plants, that require higher costs for mounting and that normally do not have the bypass.

Particular attention to the noises and to the easiness of usage are the main features of the Rimorís systems, used also in the recovery in line of film extrusion plants.

Speedfan


Automotive Testing

Description

The fansí series for Automotive Testing, on the market for more than 15 years, includes:

Wind machines also for ECE cycle certificates appreciated for the wide range of performances and for their configuration - Hot pointsí cooling (particular solutions to cool with fixed fans or carts) - The ventilating walls composed of many fans in order to generate a big dimension flows.

For this applications, are used also valves for the motor counter pressure, combustion air and cell ventilation both cooling and climatic.

Special products are the coupling tester at 1000įC and 1 Bar, the Lambda probesí and ERGís test and the anemometer machinesí test.

Venturi hot gas extraction and recovering


Venturi hot gas extraction and recovering

Description

Series of particular solutions that allow the hot gasí extraction producing air flow with the Venturi principle.

The system is an alternative solution to the ejectors and allows to work with hot gases above 1000įC controlling the pressure and avoiding important losses, that is not reachable with traditional systems.

The system is also modulating that is changing the primary air quantity it modulates the induced air.

Another line is the recoveryís construction for high temperatures without losses on the combustion, used to raise the stoking air of the burners up to 500įC without losses and with a great long-life thanks to the lack of visible welding of the flow.

Drying and Cooling systems


Cooling systems (air, water, oil)

Description

The Rimor produces systems can dry thanks to the air force.

There are two product lines: blades of air to dry glazing and air cannons to dry objects or plates.

The systems can be combined with heating systems.

The cooling rooms series are used to cool objects and plates both as a station that as a production line.

Are reduced acoustic emission systems suited to cool safely and practical.

Printing and Converting RECUBE ventilation unit


Printing and Converting RECUBE ventilation unit

Description

Ventilation unit, Rimorís patent, compacts named RECUBE, is able to obtain excellent performances in small spaces.

They can be built and placed on machine for coating, rotogravure, flexography and lamination; they allow the integration on board of the recovery energetic systems, of the insulation systems, solvent control, flow and pressure, particularly appreciated for the controlled noise and the easy maintenance.

The product was studied and designed for 6 years before being introduced in the market (2008); lately in fast grow thanks to great leaderís customers that use it on their machines.

Drying furnaces REDRYER


Drying furnaces REDRYER

Description

Furnaces studied to optimize the launch of the air made from the RECUBE on plastic films, that give great performances without stressing out the plastic or the aluminum film.

There is a wide range for the use: both horizontal and vertical with the removable and replaceable insulation which is very appreciated by customers.

Rimor has studied a particular nozzle that has both the blow part and the aspiration parts that are separated from the body in order to be used in AISI or galvanized iron and be removed to be replaced or cleaned.

The nozzle makes possible to reach high performances, with lengths that reach 6 meters one-block.

Temperature & humidity clima


Temperature & humidity clima

Description

Rimor produces and develops systems to dehumidify the environments and check the temperature.

Cooling the flow removes the humidity present; in this way you obtain condensation that is easily separated, collected and discharged.

These machines are suitable for different uses; to maintain the dry or for process air-conditioning in industrial applications, to protect against corrosion and the condensate in water power plants, for storage during the production stop, for construction industry applications.

Tempering systems (air, water and oil)


Tempering systems (air, water and oil)

Description

The systems of agitators in water and in oil of tempering are particularly valued for the practicality of use and the inexpensive use, they are modular to chambers or to input systems in removable tank.

The system is combined to oil and water cooling machines through liquid-liquid or liquid-to-air exchangers and filters for cleaning the tank.

Simulations


Simulations

Description

Rimor realizes fluid dynamics simulation studies to foresee the flows inside the machines, environment, the fans and machinesí behavior, structural simulations , thermal simulations inside the furnaces, insulation, heating and cooling times, tempering and agitation tanks studies, study of air to air heat recovery and heating behavior, plenum and facilities in order to optimize and predict the behavior of air flows.

Dehumidifications & dryer systems


Rimor Climatica

Description

Rimor produces and develops one-block package systems for the generation and treatment of the air flows in order to create process air with controlled temperature and humidity;

the control is done with the peculiarity of the passers systems, that is with air that enters with certain features and exits correct and controlled.

It can be used both as a kit for the climate chambers and the white chambers, and also in the process air dehumidification for syngas systems or before the entrance to the active carbons also in the groundwater purification plants.

Testing equipment probes and air components


Testing equipment probes and air components

Description

Rimor has created, thanks to its culture in air management, probes test systems of the following types:

Gauges Precision realizing certified SIT salt, EGT probes, automotive oxygen sensors, probes in which the fluid to be measured is the air and special conditions need to be met.

Installations at universities and calibration centers and manufacturers probes are our ten years references.

Furthermore hot flows generation systems are created, even at 1000 į C for testing exhaust pipes, turbines, flexible couplings up to 1000 į C also with 1 bar pressure.

Hangar Ambiental System


Air treatment

Description

Hangar Ambiental of Rimor is a complex plant that allows the treatment of air in environments where is realized the painting, the post-passivation painting, the post-hydroblasting drying or sandblasting of large items.

It allows for example to filter, recirculate, preheat the air inside the hangars.

Rimor ensures the compactness of the machines, the high energy efficiency permitted by the use of heat exchangers which preheat the inlet air, the high degree of customization (you can adapt to any customer requirements), the possibility of modulating the proportion of recirculated air mixing it with fresh air from outside..

it is also possible to use different types of filters depending on the type of activities that will be carried out in the hangar.

Heating Room Re-Hot Room


heating room low and high temperature

Description

Re Hot Room Hi e Re Hot Room Low are the solutions realized with the Rimor products able to transform an insulated chamber in an effective and precise room reheating temperature, zones and controlled atmosphere.

They can be used anywhere need of a practical and economical solution to create sectionable temperature controlled rooms;

Designed to zones with recirculation values inside such as to avoid any stratification and to minimize the consumption of gas, steam, diathermic oil, electric, usable depending on the operating temperature values.

Radiant heating


Radiant heating

Description

The systems with gas radiant panels are successfully used in drying systems of painted bodies with liquids or with powder with a low cost of usage that makes them effective and safe, and they are a valid alternative to electrical radiant panels.

They can be applied with exposed frames, or in closed rooms in order to allow, by the convection, a higher quality in the hidden parts.

Large bodies can be dried effectively.

Rimor is particularly appreciated for the push-pull ventilation system of radiant panels that allows to ventilate the air panels by a push-pull centralized system.

Mining Fans


mining fans

Description

The mining series is made by means of helical technology.

The fans are entirely welded by means of the central body.

The impeller is realized by means of airfoil blades with rotatable axis in aluminum or glass-filled nylon.

The interior is protected by a removable network to eventually replace the deadening material.

Rimor panels, inverter and PLC


Rimor panels, inverter and PLC

Description

Rimor, as a completion of its plants, realizes electrical command and control panels with leading brandsí inverter and PLC.

The main records and protocols for communication are available for remote managing, according to the customerís standards.

Rimor has a long tradition in building panels and control systems for its own machines and plants with the Rina certificate for the installation on ships to seal of its own capacity

Rimor Balancing


mining fans

Description

Rimor, thanks to the use balancing machine CEMB, ensures the balancing reducing vibrations bringing benefits to the machines and ensuring less wear.

Rimor guarantees a quick and simple solution to keep under control the problem of the vibrations of all the applications in which there is an object in rotation.

Through the use of portable tools, able to intervening directly on site to measure the vibrations of machines in operation, offering: analysis and diagnostics, balancing using memorized programs, and printing custom certificates.

With these tools, Rimor, is able to issue your own certificates balancing and residual vibration.

Rimor service and testing

Maintenance service


Servizi di manutenzione on site e sui prodotti

Description

Rimor service is available for customers for interventions on site with its own qualified technicians, for planned maintenance or for revising units relevant to their own field of expertise, even if itís not produced by Rimor.

In Rimor itís also available the audit and repair service of electromechanical and aeraulic products.

Rimor Service acts using quality control with certified measurement tools.

The internal system for security management ensures to clients the operators training and the punctual creation of all the documents required by the Regulations on Security (Legislative Decree 81/08) in order to give the maximum peace of mind to the customer during the yard management.

Rimor test and commissioning with certified tools


Rimor test and commissioning with certified tools

Description

Rimorís Test Room has inverter units for driving motors up to 550kW.

Itís equipped with measurements tools that have certified calibration according to the Quality Control System obtained from RINA.

In addition to our internal tests of finished products, tests with clients are possible.

Itís possible to do the final test at the clientís site in order to monitor and calibrate in the best way both Rimorís solutions and the clients solutions.

Commissioning is an important verification and control phase, itís possible to define it in order to reach the best result and the best satisfaction.

Installation and worldwide complete plants


Installation and worldwide complete plants

Description

Rimor, thanks to the experience and thanks to its training, gives customers design, construction and installation of complete plants.

Interventions were performed in different parts of the world with entirely satisfactory results. (Algeria, Guatemala, Brazil, European Union, Ukraine ...)

The internal system for security management ensures to clients the operators training and the punctual creation of all the documents required by the Regulations on Security (Legislative Decree 81/08) in order to give the maximum peace of mind to the customer during the yard management.

The integration with Camit has made it possible to increase this capability and culture.

Rimor distribution electromechanical components


Rimor distribution electromechanical components

Description

Itís the activity with which Rimor presented itself on the market in 1987, year of its creation.

As Master Distributor of the prestigious brand Marelli Motori, as it currently still is, it has a stocked warehouse with electric motors of every size and measure and in all executions.

Furthermore, Rimor builds special motors for high temperatures for particular applications.

Rimor also distributes Inverter for motorís control, in execution at day for mounting in electric panel. They can be supplied with power from 1,5Kw to 600Kw.

A series of inverter in tight execution IP55 itís also produced. Upon completion of the products distributed by Rimor there are also standard fans and electromechanical components in general.

Rimor is also present in the renewable energy field and offers synchronous and asynchronous generators Marelli for Hydroelectric Power Plants.

Rimor CAMIT

Sandblasting and painting systems


Sandblasting and painting systems

Description

Camit has been producing for years systems to sand big and medium dimensions objects in its chambers that are extremely flexible and with real and superior long-life in comparison to the competitors, and with a unique easiness of maintenance.

There is a wide range of references in leading companies and companies in the Oil & Gas, Rail, Aircraft, Naval.

The Camit painting cabins are especially appreciated in large environments for the easiness of use and the possibility of successfully combining them to sand systems in the same areas. For both technologies, the solutions for building sites with fixed and outdoor furniture chamber are available.

The company, with dozens of installations, faced and solved Insertion problems and handling pieces of high tonnage and also there are thousands of possible configurations.

Camit metallization, washing and general plants


Camit metallization, washing and general plants

Description

Metallization, cleaning parts and generally plants for gaseous pollutants, particulates, or oily fumes are part of Camitís plants for over three decades, with hundreds of installations in Italy and in the world. Camitís plants are appreciated for their quality and the correct sizing, for professional and heavy use.

Rimor S.r.l. - Head Office: Via Luigi Santagata, 43 Torino - P.I. 05395260010
Rimor Srl Contact About us Versione Italiana Brazil version