Descrizione con link .

Air Filtration

Brochure and documents attached:    
Silence Dust Remover  

Why Rimor?

The Rimor lters’ master-piece is the Dust Remover with inclined cartridges that can receive any type of lter eligible to reduce the discharge according the standards. It can be used for any metal or non metal manufacture of smoky type or dusty type.

The Dust Remover is a very advantageous lter because it’s a one-block system with on board: fan, lter, pre- lter, soundproof cabin, inverter. It is equipped with 4 electronic control systems: capacity, pressure, step by step, start&stop.

 

SILENCE DUST REMOVER
MONOBLOC, SOUNDPROOFED, COMPACT DUST COLLECTORS WITH INCLINED HIGH-PERFORMANCE CARTRIDGES. THEY CAN BE CONFIGURED WITH CONSTANT FLOW RATE OR WITH CONSTANT PRESSURE

THE SECRETS OF RIMOR DUST COLLECTORS

1 PRECIPITATION CHAMBER

It ensures the fall of particles and large-size dust.

2 PRE-CHAMBER

It ensures the deposit of heavy dust. Its tapered shape
allows the rate to be distributed over all cartridges

3 ENTRY WOUNDS ON THE CARTRIDGE

They force the air to enter any cartridge’s circumference,
getting an use of 100%.

4 CARTRIDGES’ PROTECTIONS

They protect the cartridge’s upper part during dust
removal.

5 RECOVERY CHAMBER

It ensures an equal depression on each cartridge because
of its tapered shape

6 MEASUREMENT SYSTEM

It allows to constantly check the filter flow rate, enabling
to work at a constant flow rate throughout the entire life
of cartridges

7 MANAGEMENT OF CLEANING SYSTEM

Sequential system to control the dust removal cleaning
cycle by dp internal transducer (digital control).

8 SHOCK ABSORBER

The inertial frame and the rubberized supports keep the
fan insulated from the filter.

9 VERTICAL AXIS FAN

The electric motor suffers the minimum mechanical stress
thanks to the vertical position of the rotational
axis (axis of rotation)

10 INTERNAL COUPLING SYSTEM

The fan is connected by a “suction and delivery” joint,
lifetime guarantee, made of Teflon and natural rubber.

11 CLEANING SYSTEM’S PROTECTION CHAMBER

The chamber encloses the air supply, to reduce noisiness
throughout the cleaning phase

12 CAR TYPE SEALS

Car type seals are guaranteed to face any environmental
condition.

13 FRONT ACCESS CHAMBER FOR MAINTENANCE

It provides access to all the cartridges simultaneously to
minimize the maintenance times.

14 HORIZONTALLY DEMOUNTABLE CARTRIDGES

The operator is far from the cartridge during maintenance.
It ensures the minimum contact with the cartridge to be
replaced

15 CHAMBER FOR DUST COLLECTION

It’s moved by wheels, easily demountable thanks to both
the hooks and the air-tight system.

16 DEMOUNTABLE STRUCTURE

To reduce the transportation costs and to ensure an easy
assembly, the structure is divided in two parts

17 VARIABLE SPEED CONTROL

Rimor filters are exclusively available with variable speed
control by rimor inverter IP55, that regulates pressure and
flow rate

18: SOUNDPROOFED CABIN

The fan is enclosed in a soundproofed cabin placed on the
filter top, so that the noise can be limited at 75 dB(A)

19: OUTDOOR PRODUCTS

rimor deduster is conceived and standardized to be used
in any weather condition, avoiding any covers or roofings.

20. SUCTION PLENUM

This system allows the horizontal distribution of air, to
correctly supply the recovery chamber.


Rimor S.r.l. - Head Office: Via Luigi Santagata, 43 Torino - P.I. 05395260010
Rimor Srl Contact About us Versione Italiana Brazil version