Descrizione con link .

Heating and Drying furnaces REDRYER

Brochures and documents attached:    
Drying furnaces REDRYER  

Why Rimor?

Furnaces studied to optimize the launch of the air made from the RECUBE on plastic films, that give great performances without stressing out the plastic or the aluminum film.

There is a wide range for the use: both horizontal and vertical with the removable and replaceable insulation which is very appreciated by customers.

Rimor has studied a particular nozzle that has both the blow part and the aspiration parts that are separated from the body in order to be used in AISI or galvanized iron and be removed to be replaced or cleaned.

The nozzle makes possible to reach high performances, with lengths that reach 6 meters one-block.

 

REDRYER:
Heating and drying
for film and sheets

Rimor redryers, due to the special nozzles,
guarantee the perfect distribution
of supply and exhaust air

redryer

SIMULATION AND NOOZLE FEATURES

    GENERAL FEATURES:
  • Custom layout on each customer request and necessity
  • High efficiency due to the high and costant air speed
  • Ventilation and insulation solutions (even on board)
  • Temperature up to 500°
  • Special nozzles that guarantee the maximum efficiency with a short distance from the sheet to dry
  • Nozzles blow and aspire on the whole lenght without any imperfections in the air allocation

REDRYER TYPES

Redryers can be customised based on customer’s requirements depending on: installation type (vertical / horizontal), curvature(curve or straight), modularity (single or multiple modules).

HEATING AND DRYING

HEATING

Rimor is able to determine the quantity of air and heat
required in the process, guaranting the best heating
performance.

DRYING / COATING / PRINTING

AIn order to guarantee the perfect result, Rimor needs the following technical information, determined by a technician:

  • Curvature or linearity
  • Nozzles quantity
  • Nozzles dimensions
  • Distance from the holder
  • Maximum air speed
  • TMaximum air temperature
  • Holder analysis (roughness, other features)
  • Coating type analysis

REDRYER LINES

OPENING AND CLOSING TYPES

Based on customer’s needs there are different ways to open and close a Redryer:

OPTIONAL SYSTEM AND ACCESSORIES

It is possible to integrate optional systems inside the dryers. Some of the options are ventilation system, thermal and sound coibentation system and the possibillity of heating on board. For opening or closing the Redryer can be used two types of cylinders:

RECUBE MATCHING

SPECIAL SIZES

Special customised dimensions, with lenghts up to 6 m.


Rimor S.r.l. - Head Office: Via Luigi Santagata, 43 Torino - P.I. 05395260010
Rimor Srl Contact About us Versione Italiana Brazil version